How to Change Into a Nylon Watch Strap
Recently, I had a customer ask a question about how to loop his new watch strap through his watch. He had a tight gap on his watch and his strap didn't fit. This was when I realized not everyone has the proper tools and equipment when it comes to installing thick straps. Our leather strap has two sides, making it quite thick. Believe it or not, even when installing something as simple as a nylon watch strap, you can still encounter issues.
This tutorial is intended to help guide you through some of the basics for installing nylon watch straps. We will be using our leather strap as an example, since it is thicker than a nylon watch strap.
What you will need:
- Spring bar tool
- Extra spring bars (optional Bent Spring Bar)
1. Take the strap or bracelet off the watch. For this example, a leather strap is attached.
2. Slide the spring bar fork in between the lug and the strap to push the spring bar away from the watch case.
3. Remove the spring bar from the original strap or bracelet.
4. Install the spring bar back on to the watch.
5. Slide the strap into the watch as shown below.
The extra long design of our leather strap enables the excess strap to be tucked in tightly. It is normal to experience difficulty in tucking the excess strap when the strap is new.
7. You could use a spring bar bending pliers to bend the spring bars or purchase a pair of bent spring bars here. Install the bent spring bars on both sides of the watch.
8. Our bent spring bar will add an extra 1mm clearance as shown below.
9. Repeat step 5 to install the strap.
That’s all! Enjoy your new strap and go do military things with it. Like, flying fighter jets or going to the moon. If you have any questions or concerns, please email us or comment below.
Thanks for the kind comments guys!
Soft, light, beautiful colour (ocean blue). Worth the price.